N2118 Norcold Cooling Unit  Amish Built with New Elements new LP burner for the

N2118 Norcold Cooling Unit 

Polar Max series Cooling Units are  in stock ready to ship, no lead time needed.

 Norcold Polar Series 2118 Amish Built cooling unit replacement coil is the correct replacement for Norcold Poplar Max 2118.  The Brand-new Amish built cooling unit  is designed to have a cooler boiler operating temp and produces a colder inside.

The N2118  Polar Max 2118 Norcold Brand-New Amish Built Cooling Unit

Cooling unit will come with a New LP Burner and 2 New AC Heating elements. Looks different, but is  correct re-designed coils to fit the N2118.

Note!: You must use the New LP Burner and 2 New elements we ship with unit for this N2118. Since the boiler operates at a low heat temperature you must use the LP burner we send with unit, it is still an OEM Norcold part. The LP burner allows the cooling unit operate and cool better than the OEM N2118 cooling unit with the LP burner.

1. All Upper Side vent Door baffle Must to be removed on all slide out models.

2. In slide outs, fan/Fans has to be added to the top upper side vent to force & remove hot air trapped from the fridge upper area.

3. only the 2118’s we have a disclaimer on the factory website that states the 2118 may recommended the dual compressor unit in weather condition getting close to 100 degrees due to Norcold built the N2118 with thinner wall box insulation and it also has flapper door issues sometimes not sealing.

All Cooling units comes with Tube of Thermal Mastic cold Transfer Compound, spray foam sealer to make to the foam block when placed back air tight sealed, and foil back tape to give a nice finish look around the backer

If you need to see the PDF file for the HOW TO change the Cooling Unit it you be on the Tech Services Page to click to download and print out or just read over: 

Warranty for 3 years  with the option to extend.

3 years, plus option to extend and it’s transferable.

We ship to Canada also