Now we have Frost Guard  Evaporator Fan with LED Light upgraded  to White light, ready for shipping. .

A very simple and quick way to increase your refrigerator cooling, use a Frost Guard Evaporator Fan simply install a add-on evaporator fins fan to any model with the Special LED accent light, 2 toggle switches to turn on fan or LED White light separate.

We have mainly sold this Frost Guard Deluxe LED fan through our other web site. We have sold over 4000’s this past year of the Deluxe Fans, we are making it available now through our new website. Just about all cooling unit sold through our website, the customer is adding a evaporator circulation fan to their order or the rear fans.

This unit  not designed to be wired to the interior light since not all RV Refrigerator have a usable interior usable light, but can if you confirm refrigerator has DC power to light at all times when the door switch pushed/Door Closed. Why take a chance miss-wiring to damage PC Board controlled light DC power,  slide the fan wire through the drain tube to make a DC connection on the back side. That’s the safest way

Make your refrigerator cold not just marginally cool. Keep your Inside temps more even from top to bottom

Note: For some interior light hookup. Use piggyback connector furnished so you can unplug the hot side of door switch, plug piggyback connector to switch input hot side and then plug light wire back.  No cutting of OEM wires to light. Ground wire not used.  . Confirm DC voltage when door is closed before connecting.  We did not design for interior light use.. Not  all RV Refrigerators that have interior light can be used. Run the wire through drain to make a DC connect on back side.

Note: For straight wiring to power supply at PC board.  Use the piggy back connectors for fan wires, unplug DC power from PC board, cut the wire length as needed, crimp the piggyback connectors to fan RED wire, plug fan wires to PC board, Red to positive terminal  Ground to Neg terminal, reconnect input 12 VDC to the spade terminal of the piggyback connector.

Note: For Models without a PC board terminal, only having a wire connector block the piggyback connectors will not be used.  Make your connection as needed to any 12 VDC Power source.