Dometic Cooling Unit Package SPECIAL kit upgrade Package will include a new AC electric heating element for you model RV refrigerator, 2 Fans, Clamp ON Fan kit with wire Harness, Auto Thermostat Fan switch to activate fan. Dometic Cooling Unit Package SPECIAL

Dometic Special Package Kit we put together 2 Optional Kits for customers that purchased a Dometic Cooling Unit wanting to add or upgrade  to increase the air flow and to replace the AC heating element to the cooling unit they purchased.

Option #1    Clamp ON Fan kit goes with Reman units : The Dometic Special kit will include a New AC electric heating element for your model refrigerator  2 Fan Clamp ON Fan kit with wire Harness, Auto Thermostat Fan switch to activate fans for Remanufactured cooling units or your OEM Dometic Cooling Units.

Option #2    Flush Mount 2 Fan kit goes with Brand-new cooling unit Purchase: The Dometic Special kit will include a New AC electric heating element for your model refrigerator 2 Flush mount Fans, kit with wire Harness, Auto Thermostat Fan switch to activate fan for Brand-new Amish Built Cooling Units.

Let us Know if your unit kit for a Reman or for the Brand-new Amish built if you do not purchase a cooling

This  2-fan setup designed for easy  install for any style, any model, any brand, or any size cooling unit coils.  The 2-fan setup will come with wiring harness, automatic thermostat to activate the fans. We will ship  Remanufactured cooling unit  fan switch thermostat for air temp for reaching around the 85 degree or warmer behind the refrigerator when the cooling unit is needing the higher flow of air through the condenser fins to activate fans. The fan thermostat is at the end of the wire harness next to the fans and hangs loose not mounted. If you order the Brand-new Amish Built cooling unit, we ship a style fan switch that would be mounted on the Steam pipe as the new unit is premade for.  When you install fans and are ready to wire the fans, all that’s needed is a 12VDC positive (from any source) and a good DC frame ground (from any source).  If you want to connect to the refrigerator DC, the wire harness will come with a piggyback terminal, so you do not need to cut any original wires to use fan harness wiring. All wire terminals for hook up are furnished and already crimped to wire harness.

No holes drilled at any time to mount fans or brackets.

The fan specs are:

DC Brushless Fan Motor

Fan Motor has Ball Bearings

DC 12 volt range 10.2 to 13.7

Amp draw 0.15a

9025 fan option #1 has Amp draw 0.15a…. 12032 fan option #2 amp draw 0.25

3000 RPM

CFM Air flow 46.46

dBA 28.58

option #1 fan size: 92 x 92 x 25 mm or 3 3/8 x 3 5/8 x 1 inch    option #2 fan size 120x 120x 32 mm  or  4 3/4 x 4 3/4 x 1 1/4 inch

We have other fans on the website if you have RV refrigerator that in a Slide Out section Also you may want to add a Digital Fan control to you unit to fine tune the ON & OFF for the running the fans. We have those in stock as well.