Condenser Fan thermostat OEM  replacement upper condenser fan switch. This Condenser Fan thermostat OEM switch is a normally open switch that is closed by surface temperature closes around 130 degrees.

This switch will activate the cooling unit fans. The temp setting for activating the fans with this switch is a little lower than the OEM’s fan switch.

 We feel it is better to have, when needed, the fan air flow starting before the cooling unit performance starts to fail.

This switch is use to replace the OEM’s installed switch at the time of failure or to be added to refrigerator coils when adding your own fans.

None operating fans, either from bad switch or bad fans, are the most common problem and cause of early cooling unit failure.

We have both fans and fan switches in stock.

To even give you a better Option,replace the surface fan switch with our,

Digital Fan Control which you full control of setting the fan run temp of turning ON and turning OFF.   With the Digital control you set the Fan ON & OFF Temps do not allow failure of refrigerator is it needs to have air flow sooner as noted here:

This switch is use to replace the OEM’s installed switch at the time of failure or to be added to refrigerator coils when adding your own fans.

None operating fans early, either from bad switch or bad fans, are the most common problem and cause of early cooling unit failure due to Fans not coming ON soon enough to remove the heat .

We have Fans and fan switches in stock.

To even give you a better Option,replace the surface fan switch with ours and better yet use the Digital Control an fine tune the fan cutting ON temp needed. Order your today Why Wait!