This Condenser Fan kit with  2 Fan add on Kit 85 degree thermostat, is a very easy install, usable on any brand or model RV refrigerator. You will get with this Condenser Fan kit 2 Fan kit the mounting hardware, Wire Harness, Automatic Thermostat and a master 12 Volt DC power ON-OFF toggle switch mounted in a holder, and built in fuse. 

 We have an 2 aftermarket Flush Mounted FAN kit that will increase the flow of air through the Condenser fins for fast removing the heat that was pulled from the inside refrigerator, this will allow cooling of the inside of the food zone to cool faster and able to maintain cold during the hottest of weather when you have a good flow of air through the condenser fins..

The most important way for getting your RV refrigerator to cool correct, is good flow of air through the condenser fins. Fans are not used to remove heat from the compartment, they are only used to increase air flow through the condenser fins.  Most RV refrigerators need the increased air flow when the outside temps reaches 85 degrees or higher.

The thermostat is at the end of the harness an it hangs loose metering the air temps to activaticate Fan automatically turning ON at temp of 85 to 90 degree are reached behind the refrigerator.

Fan over all size and Specs.

4 3/4 by 4 3/4 by 1 1/4

RPM 2300

Amp 0.25

DC voltage up to 13.7v

DC Brushless

Ball bearing

They can be mounted in any way you want, regardless where or how they are mounted the flow of air goes through the condenser fins.

This FAN are a great add-on for any refrigerator in a slide out room to help the air to exit out the upper vent if the baffle closes the gap from the RV wall to the condenser fin so not wasted air is lost bypass going through the condenser fin.