This 12032 Condenser Fan HV add-on or replacement Fan, is a very easy install, usable on any brand or model RV refrigerator. The 12032 Condenser Fan HV  will come with mounting hardware

We have an aftermarket FAN that will increase the flow of air through the Condenser fins for fast removal of heat that was pulled from the inside food zone, the cooling of the inside of the food zone cools faster and able to maintain cold during the hottest of weather when you have a good flow of air through the condenser fins.. Only one inch thick, will fit any refrigerator

The most important way for getting your RV refrigerator to cool correct, is good flow of air through the condenser fins. Fans are not used to remove heat from the compartment, they are only used to increase air flow through the condenser fins.  Most RV refrigerators need the increased air flow when the outside temps reaches 85 degrees or higher.

Fan over all size and Specs.

4 3/4 by 4 3/4 by 1 1/4

RPM 2300

Amp 0.25

DC voltage up to 13.7v

DC Brushless

Ball bearing

It can be mounted in many ways you want, regardless where or how it’s mounted the flow of air goes through the condenser fins.

This FAN is a great add-on for any refrigerator in a slide out room to help the air to exit out the upper vent. This fan can be zip tie to the upper vent door for units in Slide out for better cooling.

We have an aftermarket FAN can also increase the flow of air through the Condenser fins for fast removal of heat trapped above the condenser fin by zip tie to the upper vent door for unit in a slide out section to allow it to  cool faster and able to maintain cold during the hottest of weather when you have a good flow of air through the condenser fins and out.. Only one inch thick,